10-12-2011 01:33 AM
Hopefully this is not a duplicate post:
I have read much information regarding memory management including Article KB14320 and KB17624. However, I have not seen a list of required software or applications that should not or cannot be removed and still maintain phone operation. I am sure there are some applications that fall in the category of preferred, and still others that are completely up to the phone operator. Can someone help with such a list? I need to get up to the suggested minimum of 400 MB application free space and currently at 60 MB. I would like to keep as many of my optional applications as possible. I am not an Enterprise user.
Bold 9700
OS 6.0.0
Thanks
scyoung
Solved! Go to Solution.
10-12-2011 02:26 PM
button inside of their post. Further, if you are the original poster (OP) and your issue is solved, please remember to (on the post that is the solution) click the "Accept as Solution" button so that others can more easily find it. Cheers! Oh...and FWIW...I am not a RIM employee...and these forums are user-to-user...not user-to-RIM.
I am on AT&T. Please edit your Personal Profile with your DEVICE TYPE, DEVICE OS and Carrier
10-12-2011 03:18 PM
the 9700 only has 256 meg max app memory on it.
10-12-2011 06:01 PM
Woops! I misread the User Guide.
Here is where I saw the recommendation, but misread KB for MB . It is in the Bold 9700 User guide pg 22.
Thanks for your response.
Still having problems with the spinning dial which I thought was a low memory problem. Any ideas would be appreciated!
scyoung
10-12-2011 06:06 PM
Woops! I misread the User Guide.
Here is where I saw the recommendation, but misread KB for MB . It is in the Bold 9700 User guide pg 22.
Thanks for your response.!
Still having problems with the spinning dial which I thought was a low memory problem. Any ideas would be appreciated!
scyoung
10-12-2011 11:15 PM
OK...with that little detail cleared up...here's some suggestions (and background...).
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory -- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
It is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
button inside of their post. Further, if you are the original poster (OP) and your issue is solved, please remember to (on the post that is the solution) click the "Accept as Solution" button so that others can more easily find it. Cheers! Oh...and FWIW...I am not a RIM employee...and these forums are user-to-user...not user-to-RIM.
11-01-2011 06:19 AM
sdgardne,
Thanks for the information you shared and the time devoted to this topic!
As an addition to this solution, I noticed that in the BlackBerry Desktop Software, when you synchronize the desktop software with the device, you can select "Applications" on the menu located on the left side of the desktop software screen.
On the software screen the applications are then listed, and the necessary ones are dimmed and identified as "Required". These cannot be removed with the software as they are necessary for the phone to operate.
I hope I am correct with this information.
11-06-2011 11:38 AM
button inside of their post. Further, if you are the original poster (OP) and your issue is solved, please remember to (on the post that is the solution) click the "Accept as Solution" button so that others can more easily find it. Cheers! Oh...and FWIW...I am not a RIM employee...and these forums are user-to-user...not user-to-RIM.