Welcome!

Welcome to the official BlackBerry Support Community Forums.

This is your resource to discuss support topics with your peers, and learn from each other.

inside custom component

BlackBerry® Curve™

Reply
New Member
pabhay
Posts: 1
Registered: ‎02-17-2013
My Device: 9300 Curve
My Carrier: AIRTEL

Help requested!!

Hello!!

 

I have a BB 9300 Curve that freqquently resarts. I tried updating the software but it says the software is up to date. Its is BB OS 6.0. This is a new one and on a daily basis it restarts itself very frequently.

 

Please help me..

 

Regards

Abhay

Please use plain text.
Hall of Famer II
sdgardne
Posts: 47,325
Registered: ‎11-28-2008
My Device: Z30, Z10 & Q10 (10.2.1.3247), Playbook (2.1.0.1526)
My Carrier: TMobile USA

Re: Help requested!!

Hi and Welcome to the Community!

I recommend that you attempt to boot into Safe Mode:

  • KB17877 How to start a BlackBerry smartphone in Safe Mode

It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens. If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.


 

If the behavior continues in Safe Mode, then you will first need to be sure you have a good backup to your PC...click the link in my signature section below for instructions.

 

Then, you will next need to try some more drastic steps, starting with an on-device WIPE:

  • KB14058 How to delete all data and applications from the BlackBerry smartphone using the Security Wipe option

Then, before restoring or adding any apps, run for long enough to know that the behavior does not return. If it does not return, then proceed with restoring and putting your apps back onto your BB.


 

However, if the behavior continues, you then need to move to even more drastic steps...that of reloading your OS...here's a procedure:


At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:

From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:

Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:

  • C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML

Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.


You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.


You may also want to try this procedure to perhaps narrow down the precise causal item:

  1. Load your OS "bare bones"...if anything is optional, do not install it.
  2. If the behavior presents immediately, then try a different OS with step 1
  3. If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
  4. Add one thing -- no matter how tempting, just one.
  5. If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
  6. Repeat steps 4 and 5 until all things are loaded or the behavior presents

When the behavior presents, you know the culprit...the last thing you loaded.

If the behavior does not re-present, then you know that either step 1 or 2 cured it.

If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.


If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:

  • KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software

Good luck and let us know!


Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code
Please use plain text.