Welcome!

Welcome to the official BlackBerry Support Community Forums.

This is your resource to discuss support topics with your peers, and learn from each other.

inside custom component

BlackBerry® Device software

Reply
New Member
kocascon
Posts: 1
Registered: ‎08-23-2013
My Device: Torch 9810

OS update

Hey. I'm new here and I'm so desperate. So my problem began when my BB Torch 9810 went empty battery. Charged it. The blackberry logo appeared but the loading bar hanged. I mean, it won't completely load. It get's stuck half way (perhaps more than half way). Took out the battery. Same thing. Upgraded the OS and now, im at the connecting to device part of the process and the loading bar is stuck again. The desktop software cant seem to detect my device because of that problem. Now i cant just disconnect it because i wont be able to use my phone ever. Please help!!!!!
Please use plain text.
Hall of Famer II
sdgardne
Posts: 48,290
Registered: ‎11-28-2008
My Device: Z30, Z10 & Q10 (10.2.2.1531), Playbook (2.1.0.1526)

Re: OS update

Hi and Welcome to the Community!

 

First off...please do disconnect from your computer and try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):

  1. With the battery inside, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the display does
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the display does

This has been known to "kick start" some BBs.



It is also possible that your battery has been damaged...to test, this sequence is needed:

  1. Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
  2. Obtain access to a known good and identical BB...use your battery in it and see what happens

The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.


 

Once you have your battery charged and validated as OK, then you can proceed with attempting to reload your OS.

The simplest way is to, on a PC (you cannot do this on MAC):

1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.

2) Uninstall, from your PC, any BB OS packages

3) Make sure you have the BB Desktop Software already installed

4) Download and install, to your PC, the BB OS package you desire:

  • http://us.blackberry.com/support/downloads/download_sites.jsp
  • It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.

5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:

  • C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML

6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.

6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:

If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.


 

You may also need the use of these tricks:


 

Good luck and let us know!


Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code
Please use plain text.