Welcome!

Welcome to the official BlackBerry Support Community Forums.

This is your resource to discuss support topics with your peers, and learn from each other.

inside custom component

Web and WebWorks Development

Reply
Contributor
RosendoLSL
Posts: 36
Registered: ‎05-04-2010
My Device: Storm
My Carrier: Verizon

Re: App launching times out

First, thanks very much for taking the time to help me on this.  When I ping the simulator I get 4 replies of Destination host unreachable.   See below:

 

Pinging 169.254.0.1 with 32 bytes of data:
Reply from 192.168.56.1: Destination host unreachable.
Reply from 192.168.237.1: Destination host unreachable.
Reply from 192.168.48.1: Destination host unreachable.
Reply from 192.168.1.35: Destination host unreachable.

Ping statistics for 169.254.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

 

 

What settings should I correct on the VMware player?

Please use plain text.
Contributor
RosendoLSL
Posts: 36
Registered: ‎05-04-2010
My Device: Storm
My Carrier: Verizon

Re: App launching times out

 

Any feedback on the settings for VMware?

 

Please use plain text.
BlackBerry Development Advisor
oros
Posts: 1,523
Registered: ‎04-12-2010
My Device: BlackBerry Z10
My Carrier: Bell

Re: App launching times out

In your Virtual Machine Settings, under Hardware, what type of Network Connection are you set to? I'm using NAT myself.

 

I've also found that, when deploying from Ripple to Simulator, debug mode should be on. And when deploying to a Device, debug mode should be off. Unfortunately mis-matching those settings hasn't caused the timeout error like you're seeing in my case, but it has caused other issues.


Erik Oros | @WaterlooErik | eoros@blackberry.com | Developer Issue Tracker

If a reply has answered your question, please click Accept as Solution to help other visitors in the future.
Please use plain text.
Contributor
RosendoLSL
Posts: 36
Registered: ‎05-04-2010
My Device: Storm
My Carrier: Verizon

Re: App launching times out

Thanks for the feedback. I have NAT also but it is still not working. The playbook emulator works fine but not the BB10 one. And for some reason the BB10 emulator is not starting up, it freezes on the start up and I already tried deleting it and installing it again.

 

The only difference from your notes is that I am not using Ripple, I am using the SDK directly.

 

If you have any other feedback I will appreciate it.

 

R

Please use plain text.