Thank you for visiting the BlackBerry Support Community Forums.
BlackBerry will be closing the BlackBerry Support Community Forums Device Forums on April 1st (Developers, see below)
BlackBerry remains committed to providing excellent customer support to our customers. We are delighted to direct you to the CrackBerry Forums, a well-established and thorough support channel, for continued BlackBerry support. Please visit http://forums.crackberry.com or http://crackberry.com/ask. You can also continue to visit BlackBerry Support or the BlackBerry Knowledge Base for official support options available for your BlackBerry Smartphone.
"When we launched CrackBerry.com 10 years ago, we set out to make it a fun and useful destination where BlackBerry Smartphone owners could share their excitement and learn to unleash the full potential of their BlackBerry. A decade later, the CrackBerry community is as active and passionate as ever and I know our knowledgeable members and volunteers will be excited to welcome and assist more BlackBerry owners with their questions."
- Kevin Michaluk, Founder, CrackBerry.com
Developers, for more information about the BlackBerry Developer Community please review Join the Conversation on the BlackBerry Developer Community Forums found on Inside BlackBerry.
08-28-2011 09:58 PM - edited 08-28-2011 10:00 PM
A few months ago I purchased an HS-700 Bluetooth Earphone unit. This is a rather expensive accessory. The ear hook broke. I have been scowering the net trying to find who would sell a replacement.
The Blackberry dealers who I contacted do not know where I can find one. They have the same problem trying to find them for their customers.
I do not want to go to the trouble of having to make a reliable one myself. This would be a home made gadget, and I should not have to resort to this for such a high end accessory.
You would think that for the cost of this device, there should be replacement parts available!!!
Would anyone know where or how I can get a replacement ear hook. I am located in Quebec Canada.
08-28-2011 11:46 PM
Jerry, I've looked, and I recall Knottyrope has looked also, and to my knowledge, there is no replacement ear hooks available. And I agree, there should be!
PIN: C0001B7B4 Display/Scan Bar Code
PIN: C0005A9AA Display/Scan Bar Code
08-29-2011 01:34 AM - edited 08-29-2011 01:35 AM
I hope someone from RIM is reading these postings. This is going to spread like fire that we cannot have simple spare parts for such an expensive accessory. The other manufactures offer spare earhooks and silicon ear inserts for their earphones. I was able to find these spare parts for all the other manufacture high end earphones.
09-05-2011 04:15 AM - edited 09-05-2011 04:28 AM
To answer my own problem where it seems that I had to take resolve the hard way. I ended up having to make my own ear hook for my HS-700.
I used length of jewelers type brass tubing like what is used in clock making and repairs. I am used to doing precision work with small pieces. This was very time consuming.
I got as close in diameter as possible to the width of the ear hook plastic channel. It was about 2.6 mm dia. I could have used a flat rod of 2.6 mm X 1.6 mm to start with. I chose a round type because this was easier for me to work with.
I used the broken pieces to take exact measurement for the shape and length. I made a template from the original pieces. I reproduced its pattern exactly, using the brass tubing. For the insert end, I squeezed the tubing down, and filed it to exactly match the original plastic part. I used a micrometer to make sure it was as precise as possible.
The next step was to plastic coat the tubing, because brass is not a good metal to use in constant contact with skin, as like with copper. I was not going to want to make it out of gold or silver because of the great cost, even though I could do that. I slid a cut length of 3.5 mm heat shrink plastic tubing over the length of the brass part of the new ear hook that was not going to be inserted in to the earphone's hear hook slot. I shrunk down the heat shrink tubing using a heat gun at about 270 Deg F. This made it form a nice smooth plastic type finish on the new ear hook.
After inserting the new ear hook, I had to fine bend it to the right amount so the earphone would sit exactly in the correct height postion to my ear with the rubber insert. This worked out exactly perfect for me. It was sort of like when the optomitrist adjusts your glasses frame to fit exactly to your face.
The original ear hook was made of a sort of springy plastic that would self adjust to the proper fit position. This made it less critical than with using a metal that is sort of solid.
I have no idea of what the hundreds of people out there are doing for a replacement ear hook for this earphone. I think it is pathetic that we cannot purchase replacement hear hooks for such an expensive product. For the Motorola, Jabra, and the others it is possible to buy replacement ear hooks. and rubber ear inserts. They come in bags of multiples for under $10 to $12 for most makes.
When I went around to a few stores, some of the sales people told me that they are not recommending the Blackberry Bluetooth earphones because of this problem. They had customers come in who were extremely angry about this problem. These are major sales places for electronics and phone products.
As far as the performance of the HS-700, it is the best performing and simplist earphone I ever used. That is why I did not go through with the temptation of returning it and buying another brand. Unfortunately, the average person is not skilled enough or equiped with the proper tooling to make their own quality ear hook like I did.
09-11-2011 12:44 PM
09-11-2011 01:24 PM - edited 09-11-2011 02:31 PM
The ear tansdoucer is rotated to turn on the device. It then fits.
The earhook shown in the pictrure is an exact replica in shape and size as the original. It was made from a template that was made from the original that is broken. It can only fit two ways; left and right side.
02-24-2012 03:17 PM
02-24-2012 07:20 PM