04-01-2011 07:57 AM - edited 04-01-2011 09:20 AM
I bought a second hand Blackberry 8520. When i turn on, the main screen write thet:
No application linked (factory os).
I try to update the software with BlackBerry Desktop Manager, but when the program is try to connect mobile, write thet an error.
The program can't inicializing the device.
I try to use the BBSAK but this not detected device.
Pls help me what can i do.
04-01-2011 08:57 AM
Have a look at this
You will also need the OS applicable to your location and carrier
04-01-2011 09:03 AM
yeah i found this and i tried. But after 10 steps, the apploeader cant join my device... i dont understand why...
1. install the correct device software for your blackberry
2. delete 'vendor.xml' from 'C:\program files\common files\research in motion\apploader'
3. take battery out of Blackberry
4. connect USB cable to BlackBerry & PC
5. Open the command prompt
6. type in the command prompt: cd C:\program files\common files\research in motion\apploader
7. then type loader/nojvm
8. Click Next in the window that pops up
9. Click next again even if Correct PIN is not detected (UNKNOWN or FFFF..)
10. wait till app loader menu cames up and select components you want to install
04-01-2011 09:10 AM
Is the USB cable just for charging or is it a BB data cable?
04-01-2011 11:18 AM
Ok, check through this
If the device is not being detected by a Microsoft Windows-based PC.
To resolve this issue, do the following:
For Microsoft Windows versions 2000/XP
1. On the Desktop, right-click My Computer and select Properties.
2. Click the Hardware tab, then click Device Manager.
3. Expand Universal Serial Bus controllers.
4. Right-click the USB Root Hub and select Properties.
5. Click the Power Management tab, and then remove the check from the Allow the computer to turn off this device to save power check box.
6. Click OK.
7. Repeat steps 1 through 4 for each USB Root Hub listed in the Device Manager.
For Microsoft Windows Vista
1. Click Start, and type device manager in the Start Search box.
2. Click Device Manager in the Programs list.
3. If you are prompted for an administrator password or confirmation, type your password or click Continue.
4. In the Device Manager dialog box, expand Universal Serial Bus controllers.
5. Right-click USB Root Hub, and then click Properties.
6. In the USB Root Hub Properties dialog box, click the Power Management tab.
7. Remove the check from the Allow the computer to turn off this device to save power check box.
8. Repeat steps 1 through 4 for each USB Root Hub listed in the Device Manager.
Can you provide a translation of the error that AppLoader Wizard displayed please.
04-01-2011 12:55 PM
Given you have a good cable and the computer ports are configured correctly, then perhaps the problem lies with the USB port on the BB. The cable such fit firm and tight and their should be little or no movement in the port itself when connecting or disconnection.
Does your BB charge the battery when plugged in to the computer.
If it the port is broken, their is a DIY fix
04-01-2011 01:03 PM
My cable is good caz work good with my 9300. The usb is good too caz when i connect to my PC, my PC see the Blackberry device ( u see on the pic). And when i started Apploader, i connect my device, and it detect my phone firstly ( PIN: UNKNOW ) and it can be connect just after i got an error mess.