04-28-2011 01:55 PM
Just want to add some more detail to my post on this topic (4-25-2011, 0256PM).
This is how I get it to work in Windows XP. (Changing USB cable makes no difference).
PB is turned on. Go to Settings menu. "Storage and sharing" submenu.
Set "USB connections to "Connect to Windows".
Set "File Sharing " to "On".
Set "Password protect " to "On". ( I have previously activated password protection on the PB)
Connect the PB to the computer with the USB cable. Start BB desktop. . Ignore the popup messages that it fails to connect. They eventually go away.
With BB Desktop running, reset the PB as follows: Use the "soft" power off button at the bottom of the "all" applications list. Two buttons will pop up on the PB screen. Choose "Restart". Wait a long time. (3 - 5 minutes). Then it connects and asks for the password. There will be a message in the bottom Right corner of the Desktop window: "Sync All"
At this point I also see the PB as Drive Z when I click on "My computer" on the desktop.
Running WinXP, 32 bit, PB 16GB, Software 126.96.36.1990 BB Desktop version 188.8.131.52
04-28-2011 02:26 PM
04-28-2011 06:43 PM
This gets more strange. Tried to connect to PB and access it via the Z drive but now it is no longer showing up despite following the instructions by billgentles. It was before.
Tech support responded by suggesting installing the USB drivers from their site https://swdownloads.blackberry.com/Downloads/entry
Did this also but still same problem.
04-28-2011 08:27 PM
A workaround is to turn off WiFi on the Playbook before trying to connect via USB. Once you're connected and after any backups and syncs are performed I think you can turn WiFi on the Playbook back on.
04-29-2011 12:52 PM - edited 04-29-2011 12:53 PM
I am considering returning it as well. Tech support has no answers - so far..
However billgentles post of 4/28 did help. The first time I followed his detailed instructions I was able to see the playbook in My Computer. The next time it was no longer there but then I tried to see if I could map it to a drive. It did show up on my network even though it was not in My Computer. So I mapped it and can now transfer files as needed. At least now I can consistently access it through my computer.
04-29-2011 01:05 PM
It's frustrating that they haven't been able to fix this yet. I was very hopeful that the DM update yesterday would solve this issue, but it didn't. I am still in the same boat as before, where I can eventually get it to connect to my laptop, but only by restarting the PB every time. And it simply will not be recognized by my PC. The problem definitely seems to be with the drivers, as in Device Manager it shows up as a network connection, but with a yellow exclamation mark, and under properties it says "Device cannot start". Over wifi I have had no issues, as I was able to map it as a network drive on both computers, so I am able to tranfer files that way.
They really need to fix this issue (I already had a wonderful conversation with my definitely less tech savvy father - try explaining how to map a network drive to someone who doesn't even understand how to hook up a printer!)
04-29-2011 03:01 PM
04-29-2011 08:31 PM
Tried turning off WiFi. It works for me! Thanks!
Connection is much faster than reported in my previous post of 4-28-2011 on this topic. No need to restart PB. Also, a window comes up right away showing PB as Z drive.
Running WinXP, 32 bit, PB 16GB, PB Software 184.108.40.2060, BB Desktop version 220.127.116.11
05-02-2011 08:12 PM