07-10-2013 09:14 AM
how can i make my manual setting on my BB Z10, the manual setting screen on my Z10 go's no further then the APN settings and password. I'm not aible to initiate the MMSC URL and the Proxi URL.
Who can help me please.
07-10-2013 10:30 AM
01-08-2014 07:59 PM - edited 01-08-2014 11:17 PM
That's the problem, when I scroll down the mms settings do not appear only the apn settings, the mmsc settings do not appear
I have the exact same issue as well.
Rogers Z10 - OS 10.2.1.1925 (I have tried multiple OS's ever since OS 10.1 it has had this problem)
My Text Advanced settings are:
Allow Special Characters On
Service Center Address +17057969300
Routing Preference Circuit Switch Prefered
Send Text-Only Messages as Automatic
Are these the same settings that everyone else has????????
See picture below
01-08-2014 11:16 PM
For people that can access the MMSC settings: Here is a fix I found on CrackBerry
this is what you need to enter for Rogers:
MMSC URL: http://mms.gprs.rogers.com
Proxy URL: 10.128.1.69:80 (must enter a colon ( : ) after 69 and before 80)
the rest is blank
01-09-2014 05:27 PM
OK figure out the missing MMSC Settings:
I have 2 Z10's on the Rogers Network. One is my new refurbished phone and the other is going back to Roger (issue with sound). Both have not had the option of MMSC Settings in the Advanced menu. Now the one without the SIM card has the option available and the one with the SIM does not have the option.
1. Remove battery
2. Remove SIM
3. Restart phone
4. Adjust MMSC Settings
5. Remove Battery
6. Restart with both SIM and Battery again
Maybe the adjusted MMSC Setting will hold after that?
Hope that helps,